ANSI escape and control sequences used by Flash in ANSI mode››Control-O switch to G0 character set›Control-N switch to G1 character set››ESC (A  Set UK character set to G0›ESC (B   Set ASCII character set to G0›ESC (0  Set graphics character set [line-drawing] to G0››ESC )A  Set UK character set to G1›ESC )B   Set ASCII character set to G1›ESC )0  Set graphics character set [line-drawing] to G1››ESC 7   Save cursor and all character attributes›ESC 8   Restore cursor and all character attributes saved with ESC 7››ESC #8   Fills screen with 'E's [Not particularly useful]››ESC E   Moves cursor to start of next line [index]. Scrolls up if needed›ESC D   Moves cursor down one line. Scrolls text up if needed.›ESC M   Moves cursor up one line [reverse index]. Scrolls down if needed›ESC c   Resets terminal›ESC =   Enter keypad application mode›ESC >   Exit keypad application mode›ESC Z   Send identity sequence››ESC [?1l   Reset cursor key application mode›ESC [?2l   Enter VT52 emulation mode›ESC [?5l   Set screen display to 'normal'›ESC [?6l   Set absolute origin mode›ESC [?7l   Set line wraparound off›ESC   [20l   Set line feed/new line to line feed››ESC [4l      Reset insert mode››ESC [=1l   Set screen lines to 24 [Equivalent to Flash HI OFF]›[This is a private Flasave high hopes for this SIG, though on ACE it has received no posts besides mine and Shadow's. I feel that it can grow into a place where programs are written nationally and people can stop griping about not having this or that, and hack something out toge››ESC [=1h   Set screen lines to 48 [Equivalent to Flash HI ON]›[This is a private Flash escape sequence]›ESC   [PnA   Move cursor up Pn lines [Pn is optional]›ESC [PnB   Move cursor down Pn lines [Pn is optional]›ESC [PnC   Move cursor right Pn columns [Pn is optional]›ESC [PnD   Move cursor left Pn columns [Pn is optional]››ESC [PnG   Set cursor to column Pn›ESC   [PnE   Identical to ESC E, but with numeric parameter›ESC [Pne   Identical to ESC D, but with numeric parameter›ESC [PnF   Identical to ESC M, but with numeric parameter››ESC [Pl;PcH   Position cursor to line Pl and column Pc›ESC [Pl;Pcf   Identical to ESC [Pl;PcH››ESC [g or ESC [0g   Clear tab at current column›ESC [3g   Clear all tabs›ESC H   Sets a tab at current column››ESC [Pnd   Moves to row Pn›ESC   [Pn`   Moves to column Pn››ESC [PnP   Delete Pn characters. Shift remaining characters to fill.››ESC [TR;BRr   Set scrolling region from row TR [top] to BR [bottom].››ESC [PnM   Delete Pn lines››ESC [0J      Erase from cursor to end of display›ESC   [1J      Erase from start of screen to cursor›ESC [2J      Erase entire display››ESC [0K      Erase from cursor to end of line›ESC [1K      Erase from beginning of line to cursor›ESC [2K      Erase entire line››ESC [PnL   Insert Pn lines››ESC [PnZ   Backtab Pn times››ESC [c      Sends "What are you" response››ESC [5n      Terminal status report›ESC [6n      Cursor position report››ESC [0m      Set normal graphic rendition›ESC   [4m      Set underline attribute›ESC   [7m      Set reverse vide attribute›ESC   [Pnm   All OTHER values less than 7 set reverse video››