INSERT DISKETTE INTO DRIVE1 (800XL HOLD OPTION KEY) POWER UP COMPUTER ›AFTER TITLE SCREEN APPEARS PRESS OPTION TO ENTER MAIN MENU.›  ›1.  CAD OR DRAW MODE    NOTE: CAD CLEARS ALL MEM. ›        CURSOR STARTS AT 0,0,0 (X,Y,Z)›        MOVE JOYSTICK LEFT, RIGHT, UP, DOWN TO MOVE CURSOR  ( UNITES OF4 ) ›        MOVE JOYSTICK UP & RIGHT TO ENTER ERASE MODE›        PRESS START TO DECREASE Z›        PRESS SELECT TO INCREASE Z ( UNITES OF 8 )›        PRESS OPTION TO RETURN TO MAIN MENU›     TO DRAW›        POSITION CURSOR AT DESIRED X,Y,Z›        PRESS FIRE BUTTON TO SET FIRST POINT›        MOVE CURSOR TO NEXT POINT ›        PRESS FIRE BUTTON TO SET SECOND POINT AND DRAW LINE ›  ›    DISPLAY         X,       Y,       Z,     0or1, MEM. (0 TO 240)›                                             ^›                                             FIRST OR ›                                             SECOND POINT ›  ›    NOTE: CONNECTING END POINTS OF LINE SEGMENTS SAVE MEMORY ›            .______._________._____________.___.  THIS USES 5 ›         .______. ._________. .________. ._____.  THIS USES 8 ›  ›    ERASE MODE   (MOVE JOYSTICK UP AND RIGHT) ›        NOTE: RETURN TO MAIN MENU TO SAVE PIC. BEFORE DELETING ›        MOVE JOYSTICK UP OR DOWN TO SELECT LINE SEGMENT ›        PRESS FIRE BUTTON TO DELETE ›        MOVE JOYSTICK DOWN AND LEFT TO RETURN TO DRAW MODE›        IF OKIMATE10 PRINTER IS ON LINE PRESS START PRINT SCREEN ›           SEE SECTION ON PRINTING›        AFTER DELETING LINES, SAVE AND RELOAD PIC.FILE TO RECOVER ›        FULL MEMORY ›  ›    DISPLAY         SEGMENT NO.   Z1,Z2 ›  ›2. UPDATE MODE  (SAME AS CAD WITH MEM. INTACT)›  ›3. VIEW OR PERSPECTIVE MODE ›  ›    ENTER ANGLE OF ROTATION ABOUT Z AXIS›    ENTER ANGLE OF ROTATION ABOUT Y AXIS›    ENTER ANGLE OF ROTATION ABOUT X AXIS›    ENTER SCALE OF OBJECT   NOTE: IF OBJECT IS TO LARGE ›    WILL RETURN TO MAIN MENU›    HIT RETURN WITH NO ENTRY TO ABORT ›  ›    AFTER PIC. HAS BEEN DRAWN PRESS OPTION TO RETURN TO MAIN MENU ›    PRESS SELECT TO DUMP TO RS232 ›    PRESS START TO DUMP SCREEN TO OKIMATE10 PRINTER›  ›4. REFLECTION ›  ›    ENTER THE AXIS TO BE REFLECTED ON ›    NOTE: THIS PRODUCES AN ADDITIONAL SET OF LINE AND DOUBLES THE MEM. USE ›  ›5. OFFSET ›    ENTER THE AXIS TO BE OFFSET ON›    NOTE: THIS MOVES THE TABLE OF POINTS LEFT, RIGHT, UP, OR DOWN ›    ENTER THE AMOUNT OF OFFSET (0 TO 200) ›  ›6. SCALE›    ENTER THE AXIS TO BE SCALED ON›    NOTE: THIS SCALES THE TABLE OF POINTS ABOUT ONE OR ALL THREE AXIS ›    ENTER THE AMOUNT OF SCALE ›    EXAMPLE: COMPLETE WITH A SCALE OF 2 WILL DOUBLE SIZE OF OBJECT›    EXAMPLE: COMPLETE WITH A SCALE OF .5 WILL HALF THE SIZE OF OBJECT ›    EXAMPLE: X WITH A SCALE OF -1 WILL FLIP OBJECT ABOUT X AXIS ›  ›7. DISKETTE.›    ENTER FILE NAME D:FILENAME›  ›8. TRANSLATIONS ›    THIS IS LIKE THE VIEW MODE BUT IT ROTATES THE POINTES IN THE TABLE›    NOT ON THE SCREEN ›  ›9. PERAMETERS ›    1. ASPECT RATIO ›       THIS HAS TO DO WITH THE SHAPE OF THE PIXELS›       SYSTEM IS SET TO .85 ›       USE 1.25 FOR PRINTER ›       MOST MONITORS USE BETWEEN .8 AND .9›       TO CHECK YOUR SCREEN, DRAW A PERFECT SQUARE SAY 40,40›       THEN VIEW IT AT 45,90,0,1  IF NO LONGER LOOKS SQUARE THEN ›       CHANGE THE ASPECT RATIO ›  ›    2. VIEW POINT CAN BE MOVED IN OR OUT, LEFT OR RIGHT, OR UP OR DOWN›       DEPTH -100 LESS EXTREME, 100 IS MORE EXTREME  (-500,200) ›       LR + OR - 100›       UD + OR - 100›  ›    3. RS232 WINDOW ›       1 FOR ON, 0 FOR OFF›       SIZE 1 TO 128 PIXELS SQUARE›  ›    4. PRINT WINDOW ›       1 FOR ON, 0 FOR OFF›       IF WINDOW IS ON THEN FRAME WILL BE PRINTED ›       IF WINDOW IS OFF THEN FRAME WILL NOT BE PRINTED›  ›    5. MEM. CHECK ›       SYSTEM MEM. DOSE NOT CHANGE›  ›    6. RETURN TO MAIN MENU ›  ›  ›  ›PRINTER ›    SMALL CURSOR APPEARS IN UPPER LEFT CORNER ›    USE JOY STICK TO MOVE CURSOR TO UPPER LEFT CORNER OF›    PRINT WINDOW,THEN PRESS  FIRE BUTTON›    CURSOR IS NOW IN LOWER RIGHT,SET LOWER RIGHT CORNER,THEN›    PRESS FIRE BUTTON.›    PRESS START TO DUMP TO PRINTER›    PRESS OPTION TO RETURN TO MAIN MEN›