#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. # Defaults: ac_help= ac_default_prefix=/usr/local # Any additions from configure.in: ac_help="$ac_help --with-x use the X Window System" ac_help="$ac_help --enable-CPUASS Use m68k assembler CPU core " ac_help="$ac_help --enable-VERY_SLOW Is your computer very slow (disables generating screen completely) " ac_help="$ac_help --enable-NO_CYCLE_EXACT Enable color changes inside a scanline (cycle exact) " ac_help="$ac_help --enable-CRASH_MENU Show crash menu after CIM instruction " ac_help="$ac_help --enable-MONITOR_BREAK Enable BREAK command in monitor (slows CPU a little bit) " ac_help="$ac_help --enable-MONITOR_HINTS Enable hints in disassembler (addresses get human readable labels) " ac_help="$ac_help --enable-MONITOR_ASSEMBLER Enable assembler in monitor (you can enter ASM insns directly) " ac_help="$ac_help --enable-SNAILMETER Enable Snailmeter (shows how much is the emulator slower than original) " ac_help="$ac_help --enable-SVGA_SPEEDUP Draw every 1/50 sec only 1/refresh of screen " ac_help="$ac_help --enable-USE_CURSORBLOCK Use cursor keys/Ctrl for keyboard joystick " ac_help="$ac_help --enable-JOYMOUSE Support for Toshiba Joystick Mouse (Linux SVGALIB Only) " ac_help="$ac_help --enable-LINUX_JOYSTICK Enable LINUX Joystick " ac_help="$ac_help --enable-SOUND Enable Sound Support " ac_help="$ac_help --enable-NO_VOL_ONLY Enable volume only sound (digitized sound effects) " ac_help="$ac_help --enable-NO_CONSOL_SOUND Enable console sound (keyboard clicks) " ac_help="$ac_help --enable-SERIO_SOUND Enable serial in/out sound " ac_help="$ac_help --enable-NOSNDINTER Enable Sound Interpolation " ac_help="$ac_help --enable-CLIP Enable Sound Clipping " ac_help="$ac_help --enable-STEREO Enable Stereo Sound " ac_help="$ac_help --enable-BUFFERED_LOG Buffer debug output (until the graphics mode switches back to text mode) " ac_help="$ac_help --enable-SET_LED Emulate disk LED diode " ac_help="$ac_help --enable-NO_LED_ON_SCREEN Display LED on screen " # Initialize some variables set by options. # The variables have the same names as the options, with # dashes changed to underlines. build=NONE cache_file=./config.cache exec_prefix=NONE host=NONE no_create= nonopt=NONE no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= target=NONE verbose= x_includes=NONE x_libraries=NONE bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datadir='${prefix}/share' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' infodir='${prefix}/info' mandir='${prefix}/man' # Initialize some other variables. subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Maximum number of lines to put in a shell here document. ac_max_here_lines=12 ac_prev= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" ac_prev= continue fi case "$ac_option" in -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; *) ac_optarg= ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case "$ac_option" in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir="$ac_optarg" ;; -build | --build | --buil | --bui | --bu) ac_prev=build ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build="$ac_optarg" ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file="$ac_optarg" ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) datadir="$ac_optarg" ;; -disable-* | --disable-*) ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } fi ac_feature=`echo $ac_feature| sed 's/-/_/g'` eval "enable_${ac_feature}=no" ;; -enable-* | --enable-*) ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } fi ac_feature=`echo $ac_feature| sed 's/-/_/g'` case "$ac_option" in *=*) ;; *) ac_optarg=yes ;; esac eval "enable_${ac_feature}='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix="$ac_optarg" ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he) # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat << EOF Usage: configure [options] [host] Options: [defaults in brackets after descriptions] Configuration: --cache-file=FILE cache test results in FILE --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [same as prefix] --bindir=DIR user executables in DIR [EPREFIX/bin] --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] --libexecdir=DIR program executables in DIR [EPREFIX/libexec] --datadir=DIR read-only architecture-independent data in DIR [PREFIX/share] --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data in DIR [PREFIX/com] --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] --libdir=DIR object code libraries in DIR [EPREFIX/lib] --includedir=DIR C header files in DIR [PREFIX/include] --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] --infodir=DIR info documentation in DIR [PREFIX/info] --mandir=DIR man documentation in DIR [PREFIX/man] --srcdir=DIR find the sources in DIR [configure dir or ..] --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names EOF cat << EOF Host type: --build=BUILD configure for building on BUILD [BUILD=HOST] --host=HOST configure for HOST [guessed] --target=TARGET configure for TARGET [TARGET=HOST] Features and packages: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --x-includes=DIR X include files are in DIR --x-libraries=DIR X library files are in DIR EOF if test -n "$ac_help"; then echo "--enable and --with options recognized:$ac_help" fi exit 0 ;; -host | --host | --hos | --ho) ac_prev=host ;; -host=* | --host=* | --hos=* | --ho=*) host="$ac_optarg" ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir="$ac_optarg" ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir="$ac_optarg" ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir="$ac_optarg" ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir="$ac_optarg" ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ | --locals | --local | --loca | --loc | --lo) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) localstatedir="$ac_optarg" ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir="$ac_optarg" ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir="$ac_optarg" ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix="$ac_optarg" ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix="$ac_optarg" ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix="$ac_optarg" ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name="$ac_optarg" ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir="$ac_optarg" ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir="$ac_optarg" ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site="$ac_optarg" ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir="$ac_optarg" ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir="$ac_optarg" ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target="$ac_optarg" ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers) echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } fi ac_package=`echo $ac_package| sed 's/-/_/g'` case "$ac_option" in *=*) ;; *) ac_optarg=yes ;; esac eval "with_${ac_package}='$ac_optarg'" ;; -without-* | --without-*) ac_package=`echo $ac_option|sed -e 's/-*without-//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } fi ac_package=`echo $ac_package| sed 's/-/_/g'` eval "with_${ac_package}=no" ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes="$ac_optarg" ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries="$ac_optarg" ;; -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } ;; *) if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then echo "configure: warning: $ac_option: invalid host type" 1>&2 fi if test "x$nonopt" != xNONE; then { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } fi nonopt="$ac_option" ;; esac done if test -n "$ac_prev"; then { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } fi trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 # File descriptor usage: # 0 standard input # 1 file creation # 2 errors and warnings # 3 some systems may open it to /dev/tty # 4 used on the Kubota Titan # 6 checking for... messages and results # 5 compiler messages saved in config.log if test "$silent" = yes; then exec 6>/dev/null else exec 6>&1 fi exec 5>./config.log echo "\ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. " 1>&5 # Strip out --no-create and --no-recursion so they do not pile up. # Also quote any args containing shell metacharacters. ac_configure_args= for ac_arg do case "$ac_arg" in -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c) ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) ac_configure_args="$ac_configure_args '$ac_arg'" ;; *) ac_configure_args="$ac_configure_args $ac_arg" ;; esac done # NLS nuisances. # Only set these to C if already set. These must not be set unconditionally # because not all systems understand e.g. LANG=C (notably SCO). # Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! # Non-C LC_CTYPE values break the ctype check. if test "${LANG+set}" = set; then LANG=C; export LANG; fi if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h # AIX cpp loses on an empty file, so make sure it contains at least a newline. echo > confdefs.h # A filename unique to this package, relative to the directory that # configure is in, which we can look for to find out if srcdir is correct. ac_unique_file=amiga/amiga_asm.h # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. ac_prog=$0 ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } else { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } fi fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" else CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then echo "loading site script $ac_site_file" . "$ac_site_file" fi done if test -r "$cache_file"; then echo "loading cache $cache_file" . $cache_file else echo "creating cache $cache_file" > $cache_file fi ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross ac_exeext= ac_objext=o if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then ac_n= ac_c=' ' ac_t=' ' else ac_n=-n ac_c= ac_t= fi else ac_n= ac_c='\c' ac_t= fi a800_target=none case "$target" in basic|curses|ncurses|svgalib|vga|dx|sdl|falcon) a800_target="$target" ;; x11|x11-shm|xview|xview-shm|motif) a800_target=x11-"$target" ;; esac if test "$a800_target" = none; then echo "to configure atari800 use: configure --target=" echo "available atari800 targets are:" echo " basic" echo " curses ncurses" echo " svgalib" echo " vga (dos only)" echo " dx (directx)" echo " x11 x11-shm" echo " xview xview-shm" echo " motif" echo " sdl" echo " falcon" echo " " echo " " exit 1; fi if test "${LDFLAGS+set}" != set; then LDFLAGS=-s fi if test "${CFLAGS+set}" != set; then CFLAGS='-O2 -Wall' fi # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:609: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" break fi done IFS="$ac_save_ifs" fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:639: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" break fi done IFS="$ac_save_ifs" if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# -gt 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift set dummy "$ac_dir/$ac_word" "$@" shift ac_cv_prog_CC="$@" fi fi fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$CC"; then case "`uname -s`" in *win32* | *WIN32*) # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:690: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" break fi done IFS="$ac_save_ifs" fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi ;; esac fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 echo "configure:722: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF #line 733 "configure" #include "confdefs.h" main(){return(0);} EOF if { (eval echo configure:738: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then ac_cv_prog_cc_cross=no else ac_cv_prog_cc_cross=yes fi else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_prog_cc_works=no fi rm -fr conftest* ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 echo "configure:764: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 echo "configure:769: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no fi fi echo "$ac_t""$ac_cv_prog_gcc" 1>&6 if test $ac_cv_prog_gcc = yes; then GCC=yes else GCC= fi ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 echo "configure:797: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'void f(){}' > conftest.c if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then ac_cv_prog_cc_g=yes else ac_cv_prog_cc_g=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 if test "$ac_test_CFLAGS" = set; then CFLAGS="$ac_save_CFLAGS" elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi a800_host=none ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f $ac_dir/install.sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break fi done if test -z "$ac_aux_dir"; then { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } fi ac_config_guess=$ac_aux_dir/config.guess ac_config_sub=$ac_aux_dir/config.sub ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. # Make sure we can run config.sub. if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 echo "configure:856: checking host system type" >&5 host_alias=$host case "$host_alias" in NONE) case $nonopt in NONE) if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } fi ;; *) host_alias=$nonopt ;; esac ;; esac host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 case $host_os in cygwin ) a800_host=win if test "$a800_target" = dx; then CC="gcc -mno-cygwin" ac_cv_prog_CC=$CC echo "using CC=$CC to disable cygwin library"; fi ;; mingw32 ) a800_host=win;; msdosdjgpp ) a800_host=dos;; linux ) a800_host=linux;; mint ) a800_host=falcon;; esac echo "$a800_host environment found" echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 echo "configure:894: checking for Cygwin environment" >&5 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_cygwin=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_cygwin=no fi rm -f conftest* rm -f conftest* fi echo "$ac_t""$ac_cv_cygwin" 1>&6 CYGWIN= test "$ac_cv_cygwin" = yes && CYGWIN=yes echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 echo "configure:927: checking for mingw32 environment" >&5 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_mingw32=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_mingw32=no fi rm -f conftest* rm -f conftest* fi echo "$ac_t""$ac_cv_mingw32" 1>&6 MINGW32= test "$ac_cv_mingw32" = yes && MINGW32=yes echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 echo "configure:958: checking for executable suffix" >&5 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$CYGWIN" = yes || test "$MINGW32" = yes; then ac_cv_exeext=.exe else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= if { (eval echo configure:968: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in *.c | *.o | *.obj) ;; *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; esac done else { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } fi rm -f conftest* test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi fi EXEEXT="" test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} echo "$ac_t""${ac_cv_exeext}" 1>&6 ac_exeext=$EXEEXT case "$a800_host" in dos) cat >> confdefs.h <<\EOF #define DOS_DRIVES 1 EOF ;; win) cat >> confdefs.h <<\EOF #define WIN32 EOF cat >> confdefs.h <<\EOF #define BACK_SLASH 1 EOF cat >> confdefs.h <<\EOF #define DOS_DRIVES 1 EOF ;; falcon) cat >> confdefs.h <<\EOF #define DOS_DRIVES 1 EOF cat >> confdefs.h <<\EOF #define BACK_SLASH 1 EOF cat >> confdefs.h <<\EOF #define USE_CLOCK 1 EOF ;; esac echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 echo "configure:1024: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftestmake <<\EOF all: @echo 'ac_maketemp="${MAKE}"' EOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` if test -n "$ac_maketemp"; then eval ac_cv_prog_make_${ac_make}_set=yes else eval ac_cv_prog_make_${ac_make}_set=no fi rm -f conftestmake fi if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then echo "$ac_t""yes" 1>&6 SET_MAKE= else echo "$ac_t""no" 1>&6 SET_MAKE="MAKE=${MAKE-make}" fi echo $ac_n "checking for gzopen in -lz""... $ac_c" 1>&6 echo "configure:1055: checking for gzopen in -lz" >&5 ac_lib_var=`echo z'_'gzopen | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lz $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_lib=HAVE_LIB`echo z | sed -e 's/[^a-zA-Z0-9_]/_/g' \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` cat >> confdefs.h <&6 fi if test "$a800_host" != win; then echo $ac_n "checking for main in -lm""... $ac_c" 1>&6 echo "configure:1104: checking for main in -lm" >&5 ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lm $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_lib=HAVE_LIB`echo m | sed -e 's/[^a-zA-Z0-9_]/_/g' \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` cat >> confdefs.h <&6 fi fi OBJ= if test "$a800_host" = win; then echo $ac_n "checking for main in -lgdi32""... $ac_c" 1>&6 echo "configure:1152: checking for main in -lgdi32" >&5 ac_lib_var=`echo gdi32'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lgdi32 $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_lib=HAVE_LIB`echo gdi32 | sed -e 's/[^a-zA-Z0-9_]/_/g' \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` cat >> confdefs.h <&6 echo gdi32 library not found; exit 1 fi echo $ac_n "checking for main in -lwinmm""... $ac_c" 1>&6 echo "configure:1196: checking for main in -lwinmm" >&5 ac_lib_var=`echo winmm'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lwinmm $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_lib=HAVE_LIB`echo winmm | sed -e 's/[^a-zA-Z0-9_]/_/g' \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` cat >> confdefs.h <&6 echo winmm library not found; exit 1 fi OBJ=win32/atari.ro fi case "$a800_target" in basic) cat >> confdefs.h <<\EOF #define BASIC 1 EOF OBJ=atari_basic.o ;; vga) if test "$a800_host" != dos; then echo "cannot build vga outside dos" exit 1 fi cat >> confdefs.h <<\EOF #define VGA 1 EOF OBJ="dos/atari_vga.o dos/vga_gfx.o dos/vga_asm.o" ;; svgalib) echo $ac_n "checking for main in -lvga""... $ac_c" 1>&6 echo "configure:1263: checking for main in -lvga" >&5 ac_lib_var=`echo vga'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lvga $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_lib=HAVE_LIB`echo vga | sed -e 's/[^a-zA-Z0-9_]/_/g' \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` cat >> confdefs.h <&6 echo vga library not found; exit 1 fi cat >> confdefs.h <<\EOF #define SVGALIB 1 EOF OBJ="atari_svgalib.o" ;; curses) echo $ac_n "checking for main in -lcurses""... $ac_c" 1>&6 echo "configure:1314: checking for main in -lcurses" >&5 ac_lib_var=`echo curses'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lcurses $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_lib=HAVE_LIB`echo curses | sed -e 's/[^a-zA-Z0-9_]/_/g' \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` cat >> confdefs.h <&6 echo curses library not found; exit 1 fi cat >> confdefs.h <<\EOF #define CURSES 1 EOF OBJ=atari_curses.o ;; ncurses) echo $ac_n "checking for main in -lncurses""... $ac_c" 1>&6 echo "configure:1365: checking for main in -lncurses" >&5 ac_lib_var=`echo ncurses'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lncurses $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_lib=HAVE_LIB`echo ncurses | sed -e 's/[^a-zA-Z0-9_]/_/g' \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` cat >> confdefs.h <&6 echo ncurses library not found; exit 1 fi cat >> confdefs.h <<\EOF #define NCURSES 1 EOF cat >> confdefs.h <<\EOF #define CURSES 1 EOF OBJ=atari_curses.o ;; dx) echo $ac_n "checking for main in -lddraw""... $ac_c" 1>&6 echo "configure:1420: checking for main in -lddraw" >&5 ac_lib_var=`echo ddraw'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lddraw $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_lib=HAVE_LIB`echo ddraw | sed -e 's/[^a-zA-Z0-9_]/_/g' \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` cat >> confdefs.h <&6 echo ddraw library not found; exit 1 fi echo $ac_n "checking for main in -ldinput""... $ac_c" 1>&6 echo "configure:1464: checking for main in -ldinput" >&5 ac_lib_var=`echo dinput'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldinput $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_lib=HAVE_LIB`echo dinput | sed -e 's/[^a-zA-Z0-9_]/_/g' \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` cat >> confdefs.h <&6 echo dinput library not found; exit 1 fi echo $ac_n "checking for main in -ldsound""... $ac_c" 1>&6 echo "configure:1508: checking for main in -ldsound" >&5 ac_lib_var=`echo dsound'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldsound $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_lib=HAVE_LIB`echo dsound | sed -e 's/[^a-zA-Z0-9_]/_/g' \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` cat >> confdefs.h <&6 echo dsound library not found; exit 1 fi echo $ac_n "checking for main in -ldxguid""... $ac_c" 1>&6 echo "configure:1552: checking for main in -ldxguid" >&5 ac_lib_var=`echo dxguid'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldxguid $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_lib=HAVE_LIB`echo dxguid | sed -e 's/[^a-zA-Z0-9_]/_/g' \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` cat >> confdefs.h <&6 echo dxguid library not found; exit 1 fi cat >> confdefs.h <<\EOF #define DIRECTX 1 EOF OBJ="win32/atari_win32.o \ win32/screen.o \ win32/main.o \ win32/keyboard.o \ win32/atari.ro" ;; sdl) CFLAGS="$CFLAGS `sdl-config --cflags`" LIBS="$LIBS `sdl-config --libs`" OBJ="$OBJ \ atari_sdl.o" ;; falcon) LIBS="$LIBS -lgem" OBJ="$OBJ \ atari_falcon.o \ falcon/c2p_uni.o \ falcon/c2p_unid.o \ falcon/videl.o \ falcon/ikbd.o" ;; x11-*) echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 echo "configure:1623: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # This must be in double quotes, not single quotes, because CPP may get # substituted into the Makefile and "${CC-cc}" will confuse make. CPP="${CC-cc} -E" # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1644: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1661: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1678: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP=/lib/cpp fi rm -f conftest* fi rm -f conftest* fi rm -f conftest* ac_cv_prog_CPP="$CPP" fi CPP="$ac_cv_prog_CPP" else ac_cv_prog_CPP="$CPP" fi echo "$ac_t""$CPP" 1>&6 # If we find X, set shell vars x_includes and x_libraries to the # paths, otherwise set no_x=yes. # Uses ac_ vars as temps to allow command line to override cache and checks. # --without-x overrides everything else, but does not touch the cache. echo $ac_n "checking for X""... $ac_c" 1>&6 echo "configure:1707: checking for X" >&5 # Check whether --with-x or --without-x was given. if test "${with_x+set}" = set; then withval="$with_x" : fi # $have_x is `yes', `no', `disabled', or empty when we do not yet know. if test "x$with_x" = xno; then # The user explicitly disabled X. have_x=disabled else if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then # Both variables are already set. have_x=yes else if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # One or both of the vars are not set, and there is no cached value. ac_x_includes=NO ac_x_libraries=NO rm -fr conftestdir if mkdir conftestdir; then cd conftestdir # Make sure to not put "make" in the Imakefile rules, since we grep it out. cat > Imakefile <<'EOF' acfindx: @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"' EOF if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} acfindx 2>/dev/null | grep -v make` # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. for ac_extension in a so sl; do if test ! -f $ac_im_usrlibdir/libX11.$ac_extension && test -f $ac_im_libdir/libX11.$ac_extension; then ac_im_usrlibdir=$ac_im_libdir; break fi done # Screen out bogus values from the imake configuration. They are # bogus both because they are the default anyway, and because # using them would break gcc on systems where it needs fixed includes. case "$ac_im_incroot" in /usr/include) ;; *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;; esac case "$ac_im_usrlibdir" in /usr/lib | /lib) ;; *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;; esac fi cd .. rm -fr conftestdir fi if test "$ac_x_includes" = NO; then # Guess where to find include files, by looking for this one X11 .h file. test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h # First, try using that file with no special directory specified. cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1774: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* # We can compile using X headers with no special include directory. ac_x_includes= else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* # Look for the header file in a standard set of common directories. # Check X11 before X11Rn because it is often a symlink to the current release. for ac_dir in \ /usr/X11/include \ /usr/X11R6/include \ /usr/X11R5/include \ /usr/X11R4/include \ \ /usr/include/X11 \ /usr/include/X11R6 \ /usr/include/X11R5 \ /usr/include/X11R4 \ \ /usr/local/X11/include \ /usr/local/X11R6/include \ /usr/local/X11R5/include \ /usr/local/X11R4/include \ \ /usr/local/include/X11 \ /usr/local/include/X11R6 \ /usr/local/include/X11R5 \ /usr/local/include/X11R4 \ \ /usr/X386/include \ /usr/x386/include \ /usr/XFree86/include/X11 \ \ /usr/include \ /usr/local/include \ /usr/unsupported/include \ /usr/athena/include \ /usr/local/x11r5/include \ /usr/lpp/Xamples/include \ \ /usr/openwin/include \ /usr/openwin/share/include \ ; \ do if test -r "$ac_dir/$x_direct_test_include"; then ac_x_includes=$ac_dir break fi done fi rm -f conftest* fi # $ac_x_includes = NO if test "$ac_x_libraries" = NO; then # Check for the libraries. test -z "$x_direct_test_library" && x_direct_test_library=Xt test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc # See if we find them without any special options. # Don't add to $LIBS permanently. ac_save_LIBS="$LIBS" LIBS="-l$x_direct_test_library $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* LIBS="$ac_save_LIBS" # We can link X programs with no special library path. ac_x_libraries= else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* LIBS="$ac_save_LIBS" # First see if replacing the include by lib works. # Check X11 before X11Rn because it is often a symlink to the current release. for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \ /usr/X11/lib \ /usr/X11R6/lib \ /usr/X11R5/lib \ /usr/X11R4/lib \ \ /usr/lib/X11 \ /usr/lib/X11R6 \ /usr/lib/X11R5 \ /usr/lib/X11R4 \ \ /usr/local/X11/lib \ /usr/local/X11R6/lib \ /usr/local/X11R5/lib \ /usr/local/X11R4/lib \ \ /usr/local/lib/X11 \ /usr/local/lib/X11R6 \ /usr/local/lib/X11R5 \ /usr/local/lib/X11R4 \ \ /usr/X386/lib \ /usr/x386/lib \ /usr/XFree86/lib/X11 \ \ /usr/lib \ /usr/local/lib \ /usr/unsupported/lib \ /usr/athena/lib \ /usr/local/x11r5/lib \ /usr/lpp/Xamples/lib \ /lib/usr/lib/X11 \ \ /usr/openwin/lib \ /usr/openwin/share/lib \ ; \ do for ac_extension in a so sl; do if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then ac_x_libraries=$ac_dir break 2 fi done done fi rm -f conftest* fi # $ac_x_libraries = NO if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then # Didn't find X anywhere. Cache the known absence of X. ac_cv_have_x="have_x=no" else # Record where we found X for the cache. ac_cv_have_x="have_x=yes \ ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" fi fi fi eval "$ac_cv_have_x" fi # $with_x != no if test "$have_x" != yes; then echo "$ac_t""$have_x" 1>&6 no_x=yes else # If each of the values was on the command line, it overrides each guess. test "x$x_includes" = xNONE && x_includes=$ac_x_includes test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries # Update the cache value to reflect the command line values. ac_cv_have_x="have_x=yes \ ac_x_includes=$x_includes ac_x_libraries=$x_libraries" echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6 fi if test -n "$x_includes"; then CFLAGS="$CFLAGS -I$x_includes" fi if test -n "$x_libraries"; then LDFLAGS="$LDFLAGS -L$x_libraries" fi echo $ac_n "checking for main in -lX11""... $ac_c" 1>&6 echo "configure:1943: checking for main in -lX11" >&5 ac_lib_var=`echo X11'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lX11 $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_lib=HAVE_LIB`echo X11 | sed -e 's/[^a-zA-Z0-9_]/_/g' \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` cat >> confdefs.h <&6 echo X11 library not found; exit 1 fi cat >> confdefs.h <<\EOF #define X11 1 EOF case "$a800_target" in *-shm) echo $ac_n "checking for main in -lXext""... $ac_c" 1>&6 echo "configure:1994: checking for main in -lXext" >&5 ac_lib_var=`echo Xext'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lXext $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_lib=HAVE_LIB`echo Xext | sed -e 's/[^a-zA-Z0-9_]/_/g' \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` cat >> confdefs.h <&6 fi cat >> confdefs.h <<\EOF #define SHM 1 EOF ;; esac case "$a800_target" in x11-xview*) echo $ac_n "checking for main in -lxview""... $ac_c" 1>&6 echo "configure:2046: checking for main in -lxview" >&5 ac_lib_var=`echo xview'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lxview $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_lib=HAVE_LIB`echo xview | sed -e 's/[^a-zA-Z0-9_]/_/g' \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` cat >> confdefs.h <&6 echo xview library not found; exit 1 fi echo $ac_n "checking for main in -lolgx""... $ac_c" 1>&6 echo "configure:2090: checking for main in -lolgx" >&5 ac_lib_var=`echo olgx'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lolgx $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_lib=HAVE_LIB`echo olgx | sed -e 's/[^a-zA-Z0-9_]/_/g' \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` cat >> confdefs.h <&6 echo olgx library not found; exit 1 fi cat >> confdefs.h <<\EOF #define XVIEW 1 EOF ;; x11-motif) echo $ac_n "checking for main in -lXm""... $ac_c" 1>&6 echo "configure:2140: checking for main in -lXm" >&5 ac_lib_var=`echo Xm'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lXm $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_lib=HAVE_LIB`echo Xm | sed -e 's/[^a-zA-Z0-9_]/_/g' \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` cat >> confdefs.h <&6 echo Xm library not found; exit 1 fi echo $ac_n "checking for main in -lXt""... $ac_c" 1>&6 echo "configure:2184: checking for main in -lXt" >&5 ac_lib_var=`echo Xt'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lXt $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_lib=HAVE_LIB`echo Xt | sed -e 's/[^a-zA-Z0-9_]/_/g' \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` cat >> confdefs.h <&6 echo Xt library not found; exit 1 fi echo $ac_n "checking for main in -lgen""... $ac_c" 1>&6 echo "configure:2228: checking for main in -lgen" >&5 ac_lib_var=`echo gen'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lgen $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_lib=HAVE_LIB`echo gen | sed -e 's/[^a-zA-Z0-9_]/_/g' \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` cat >> confdefs.h <&6 echo gen library not found; exit 1 fi echo $ac_n "checking for main in -lsocket""... $ac_c" 1>&6 echo "configure:2272: checking for main in -lsocket" >&5 ac_lib_var=`echo socket'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_lib=HAVE_LIB`echo socket | sed -e 's/[^a-zA-Z0-9_]/_/g' \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` cat >> confdefs.h <&6 echo socket library not found; exit 1 fi cat >> confdefs.h <<\EOF #define MOTIF 1 EOF ;; esac OBJ="$OBJ atari_x11.o" ;; esac ac_header_dirent=no for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6 echo "configure:2332: checking for $ac_hdr that defines DIR" >&5 if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include <$ac_hdr> int main() { DIR *dirp = 0; ; return 0; } EOF if { (eval echo configure:2345: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* eval "ac_cv_header_dirent_$ac_safe=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_dirent_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_dirent_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. if test $ac_header_dirent = dirent.h; then echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6 echo "configure:2370: checking for opendir in -ldir" >&5 ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldir $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBS="$LIBS -ldir" else echo "$ac_t""no" 1>&6 fi else echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6 echo "configure:2411: checking for opendir in -lx" >&5 ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lx $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBS="$LIBS -lx" else echo "$ac_t""no" 1>&6 fi fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 echo "configure:2453: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include #include #include EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:2466: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* ac_cv_header_stdc=yes else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext < EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "memchr" >/dev/null 2>&1; then : else rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext < EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "free" >/dev/null 2>&1; then : else rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') #define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF if { (eval echo configure:2533: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_header_stdc=no fi rm -fr conftest* fi fi fi echo "$ac_t""$ac_cv_header_stdc" 1>&6 if test $ac_cv_header_stdc = yes; then cat >> confdefs.h <<\EOF #define STDC_HEADERS 1 EOF fi for ac_hdr in fcntl.h strings.h sys/ioctl.h sys/time.h unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:2560: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:2570: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done echo $ac_n "checking for working const""... $ac_c" 1>&6 echo "configure:2598: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <j = 5; } { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ const int foo = 10; } ; return 0; } EOF if { (eval echo configure:2652: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_c_const=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_c_const" 1>&6 if test $ac_cv_c_const = no; then cat >> confdefs.h <<\EOF #define const EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 echo "configure:2673: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* done fi echo "$ac_t""$ac_cv_c_inline" 1>&6 case "$ac_cv_c_inline" in inline | yes) ;; no) cat >> confdefs.h <<\EOF #define inline EOF ;; *) cat >> confdefs.h <&6 echo "configure:2713: checking whether time.h and sys/time.h may both be included" >&5 if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include #include int main() { struct tm *tp; ; return 0; } EOF if { (eval echo configure:2727: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_header_time=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_header_time=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_header_time" 1>&6 if test $ac_cv_header_time = yes; then cat >> confdefs.h <<\EOF #define TIME_WITH_SYS_TIME 1 EOF fi echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6 echo "configure:2748: checking whether struct tm is in sys/time.h or time.h" >&5 if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include int main() { struct tm *tp; tp->tm_sec; ; return 0; } EOF if { (eval echo configure:2761: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_struct_tm=time.h else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_struct_tm=sys/time.h fi rm -f conftest* fi echo "$ac_t""$ac_cv_struct_tm" 1>&6 if test $ac_cv_struct_tm = sys/time.h; then cat >> confdefs.h <<\EOF #define TM_IN_SYS_TIME 1 EOF fi if test $ac_cv_prog_gcc = yes; then echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6 echo "configure:2784: checking whether ${CC-cc} needs -traditional" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_pattern="Autoconf.*'x'" cat > conftest.$ac_ext < Autoconf TIOCGETP EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "$ac_pattern" >/dev/null 2>&1; then rm -rf conftest* ac_cv_prog_gcc_traditional=yes else rm -rf conftest* ac_cv_prog_gcc_traditional=no fi rm -f conftest* if test $ac_cv_prog_gcc_traditional = no; then cat > conftest.$ac_ext < Autoconf TCGETA EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "$ac_pattern" >/dev/null 2>&1; then rm -rf conftest* ac_cv_prog_gcc_traditional=yes fi rm -f conftest* fi fi echo "$ac_t""$ac_cv_prog_gcc_traditional" 1>&6 if test $ac_cv_prog_gcc_traditional = yes; then CC="$CC -traditional" fi fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 echo "configure:2830: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include #ifdef signal #undef signal #endif #ifdef __cplusplus extern "C" void (*signal (int, void (*)(int)))(int); #else void (*signal ()) (); #endif int main() { int i; ; return 0; } EOF if { (eval echo configure:2852: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_type_signal=int fi rm -f conftest* fi echo "$ac_t""$ac_cv_type_signal" 1>&6 cat >> confdefs.h <&6 echo "configure:2871: checking for vprintf" >&5 if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char vprintf(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_vprintf) || defined (__stub___vprintf) choke me #else vprintf(); #endif ; return 0; } EOF if { (eval echo configure:2899: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_vprintf=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_vprintf=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'vprintf`\" = yes"; then echo "$ac_t""yes" 1>&6 cat >> confdefs.h <<\EOF #define HAVE_VPRINTF 1 EOF else echo "$ac_t""no" 1>&6 fi if test "$ac_cv_func_vprintf" != yes; then echo $ac_n "checking for _doprnt""... $ac_c" 1>&6 echo "configure:2923: checking for _doprnt" >&5 if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char _doprnt(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub__doprnt) || defined (__stub____doprnt) choke me #else _doprnt(); #endif ; return 0; } EOF if { (eval echo configure:2951: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func__doprnt=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func__doprnt=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'_doprnt`\" = yes"; then echo "$ac_t""yes" 1>&6 cat >> confdefs.h <<\EOF #define HAVE_DOPRNT 1 EOF else echo "$ac_t""no" 1>&6 fi fi for ac_func in getcwd gettimeofday select strdup strerror strstr strtol do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:2978: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:3006: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 fi done echo if test "$a800_host" = falcon; then # Check whether --enable-CPUASS or --disable-CPUASS was given. if test "${enable_CPUASS+set}" = set; then enableval="$enable_CPUASS" if test "$enableval" = "yes" ; then echo "$ac_t""Enabling CPUASS" 1>&6 a800_ans=y ac_cv_a800_CPUASS=y cat >> confdefs.h <<\EOF #define CPUASS 1 EOF else echo "$ac_t""Disabling CPUASS" 1>&6 fi else if test -n "$ac_cv_a800_CPUASS"; then a800_defans=$ac_cv_a800_CPUASS else a800_defans=n fi if test "$a800_defans" = "y"; then echo "Use m68k assembler CPU core? yes" else echo "Use m68k assembler CPU core? no" fi a800_ans=$a800_defans if test "$a800_ans" = y; then cat >> confdefs.h <<\EOF #define CPUASS 1 EOF fi ac_cv_a800_CPUASS=$a800_ans fi if test "$a800_ans" = y; then OBJ="$OBJ cpu_m68k.o" fi fi # Check whether --enable-VERY_SLOW or --disable-VERY_SLOW was given. if test "${enable_VERY_SLOW+set}" = set; then enableval="$enable_VERY_SLOW" if test "$enableval" = "yes" ; then echo "$ac_t""Enabling VERY_SLOW" 1>&6 a800_ans=y ac_cv_a800_VERY_SLOW=y cat >> confdefs.h <<\EOF #define VERY_SLOW 1 EOF else echo "$ac_t""Disabling VERY_SLOW" 1>&6 fi else if test -n "$ac_cv_a800_VERY_SLOW"; then a800_defans=$ac_cv_a800_VERY_SLOW else a800_defans=n fi if test "$a800_defans" = "y"; then echo "Is your computer very slow (disables generating screen completely)? yes" else echo "Is your computer very slow (disables generating screen completely)? no" fi a800_ans=$a800_defans if test "$a800_ans" = y; then cat >> confdefs.h <<\EOF #define VERY_SLOW 1 EOF fi ac_cv_a800_VERY_SLOW=$a800_ans fi # Check whether --enable-NO_CYCLE_EXACT or --disable-NO_CYCLE_EXACT was given. if test "${enable_NO_CYCLE_EXACT+set}" = set; then enableval="$enable_NO_CYCLE_EXACT" if test "$enableval" = "yes" ; then echo "$ac_t""Enabling NO_CYCLE_EXACT" 1>&6 a800_ans=y ac_cv_a800_NO_CYCLE_EXACT=y cat >> confdefs.h <<\EOF #define NO_CYCLE_EXACT 1 EOF else echo "$ac_t""Disabling NO_CYCLE_EXACT" 1>&6 fi else if test -n "$ac_cv_a800_NO_CYCLE_EXACT"; then a800_defans=$ac_cv_a800_NO_CYCLE_EXACT else a800_defans=y fi if test "$a800_defans" = "y"; then echo "Enable color changes inside a scanline (cycle exact)? yes" else echo "Enable color changes inside a scanline (cycle exact)? no" fi a800_ans=$a800_defans if test "$a800_ans" = n; then cat >> confdefs.h <<\EOF #define NO_CYCLE_EXACT 1 EOF fi ac_cv_a800_NO_CYCLE_EXACT=$a800_ans fi # Check whether --enable-CRASH_MENU or --disable-CRASH_MENU was given. if test "${enable_CRASH_MENU+set}" = set; then enableval="$enable_CRASH_MENU" if test "$enableval" = "yes" ; then echo "$ac_t""Enabling CRASH_MENU" 1>&6 a800_ans=y ac_cv_a800_CRASH_MENU=y cat >> confdefs.h <<\EOF #define CRASH_MENU 1 EOF else echo "$ac_t""Disabling CRASH_MENU" 1>&6 fi else if test -n "$ac_cv_a800_CRASH_MENU"; then a800_defans=$ac_cv_a800_CRASH_MENU else a800_defans=y fi if test "$a800_defans" = "y"; then echo "Show crash menu after CIM instruction? yes" else echo "Show crash menu after CIM instruction? no" fi a800_ans=$a800_defans if test "$a800_ans" = y; then cat >> confdefs.h <<\EOF #define CRASH_MENU 1 EOF fi ac_cv_a800_CRASH_MENU=$a800_ans fi # Check whether --enable-MONITOR_BREAK or --disable-MONITOR_BREAK was given. if test "${enable_MONITOR_BREAK+set}" = set; then enableval="$enable_MONITOR_BREAK" if test "$enableval" = "yes" ; then echo "$ac_t""Enabling MONITOR_BREAK" 1>&6 a800_ans=y ac_cv_a800_MONITOR_BREAK=y cat >> confdefs.h <<\EOF #define MONITOR_BREAK 1 EOF else echo "$ac_t""Disabling MONITOR_BREAK" 1>&6 fi else if test -n "$ac_cv_a800_MONITOR_BREAK"; then a800_defans=$ac_cv_a800_MONITOR_BREAK else a800_defans=n fi if test "$a800_defans" = "y"; then echo "Enable BREAK command in monitor (slows CPU a little bit)? yes" else echo "Enable BREAK command in monitor (slows CPU a little bit)? no" fi a800_ans=$a800_defans if test "$a800_ans" = y; then cat >> confdefs.h <<\EOF #define MONITOR_BREAK 1 EOF fi ac_cv_a800_MONITOR_BREAK=$a800_ans fi # Check whether --enable-MONITOR_HINTS or --disable-MONITOR_HINTS was given. if test "${enable_MONITOR_HINTS+set}" = set; then enableval="$enable_MONITOR_HINTS" if test "$enableval" = "yes" ; then echo "$ac_t""Enabling MONITOR_HINTS" 1>&6 a800_ans=y ac_cv_a800_MONITOR_HINTS=y cat >> confdefs.h <<\EOF #define MONITOR_HINTS 1 EOF else echo "$ac_t""Disabling MONITOR_HINTS" 1>&6 fi else if test -n "$ac_cv_a800_MONITOR_HINTS"; then a800_defans=$ac_cv_a800_MONITOR_HINTS else a800_defans=y fi if test "$a800_defans" = "y"; then echo "Enable hints in disassembler (addresses get human readable labels)? yes" else echo "Enable hints in disassembler (addresses get human readable labels)? no" fi a800_ans=$a800_defans if test "$a800_ans" = y; then cat >> confdefs.h <<\EOF #define MONITOR_HINTS 1 EOF fi ac_cv_a800_MONITOR_HINTS=$a800_ans fi # Check whether --enable-MONITOR_ASSEMBLER or --disable-MONITOR_ASSEMBLER was given. if test "${enable_MONITOR_ASSEMBLER+set}" = set; then enableval="$enable_MONITOR_ASSEMBLER" if test "$enableval" = "yes" ; then echo "$ac_t""Enabling MONITOR_ASSEMBLER" 1>&6 a800_ans=y ac_cv_a800_MONITOR_ASSEMBLER=y cat >> confdefs.h <<\EOF #define MONITOR_ASSEMBLER 1 EOF else echo "$ac_t""Disabling MONITOR_ASSEMBLER" 1>&6 fi else if test -n "$ac_cv_a800_MONITOR_ASSEMBLER"; then a800_defans=$ac_cv_a800_MONITOR_ASSEMBLER else a800_defans=n fi if test "$a800_defans" = "y"; then echo "Enable assembler in monitor (you can enter ASM insns directly)? yes" else echo "Enable assembler in monitor (you can enter ASM insns directly)? no" fi a800_ans=$a800_defans if test "$a800_ans" = y; then cat >> confdefs.h <<\EOF #define MONITOR_ASSEMBLER 1 EOF fi ac_cv_a800_MONITOR_ASSEMBLER=$a800_ans fi # Check whether --enable-SNAILMETER or --disable-SNAILMETER was given. if test "${enable_SNAILMETER+set}" = set; then enableval="$enable_SNAILMETER" if test "$enableval" = "yes" ; then echo "$ac_t""Enabling SNAILMETER" 1>&6 a800_ans=y ac_cv_a800_SNAILMETER=y cat >> confdefs.h <<\EOF #define SNAILMETER 1 EOF else echo "$ac_t""Disabling SNAILMETER" 1>&6 fi else if test -n "$ac_cv_a800_SNAILMETER"; then a800_defans=$ac_cv_a800_SNAILMETER else a800_defans=n fi if test "$a800_defans" = "y"; then echo "Enable Snailmeter (shows how much is the emulator slower than original)? yes" else echo "Enable Snailmeter (shows how much is the emulator slower than original)? no" fi a800_ans=$a800_defans if test "$a800_ans" = y; then cat >> confdefs.h <<\EOF #define SNAILMETER 1 EOF fi ac_cv_a800_SNAILMETER=$a800_ans fi if test "$a800_target" = svgalib; then # Check whether --enable-SVGA_SPEEDUP or --disable-SVGA_SPEEDUP was given. if test "${enable_SVGA_SPEEDUP+set}" = set; then enableval="$enable_SVGA_SPEEDUP" if test "$enableval" = "yes" ; then echo "$ac_t""Enabling SVGA_SPEEDUP" 1>&6 a800_ans=y ac_cv_a800_SVGA_SPEEDUP=y cat >> confdefs.h <<\EOF #define SVGA_SPEEDUP 1 EOF else echo "$ac_t""Disabling SVGA_SPEEDUP" 1>&6 fi else if test -n "$ac_cv_a800_SVGA_SPEEDUP"; then a800_defans=$ac_cv_a800_SVGA_SPEEDUP else a800_defans=n fi if test "$a800_defans" = "y"; then echo "Draw every 1/50 sec only 1/refresh of screen? yes" else echo "Draw every 1/50 sec only 1/refresh of screen? no" fi a800_ans=$a800_defans if test "$a800_ans" = y; then cat >> confdefs.h <<\EOF #define SVGA_SPEEDUP 1 EOF fi ac_cv_a800_SVGA_SPEEDUP=$a800_ans fi # Check whether --enable-USE_CURSORBLOCK or --disable-USE_CURSORBLOCK was given. if test "${enable_USE_CURSORBLOCK+set}" = set; then enableval="$enable_USE_CURSORBLOCK" if test "$enableval" = "yes" ; then echo "$ac_t""Enabling USE_CURSORBLOCK" 1>&6 a800_ans=y ac_cv_a800_USE_CURSORBLOCK=y cat >> confdefs.h <<\EOF #define USE_CURSORBLOCK 1 EOF else echo "$ac_t""Disabling USE_CURSORBLOCK" 1>&6 fi else if test -n "$ac_cv_a800_USE_CURSORBLOCK"; then a800_defans=$ac_cv_a800_USE_CURSORBLOCK else a800_defans=n fi if test "$a800_defans" = "y"; then echo "Use cursor keys/Ctrl for keyboard joystick? yes" else echo "Use cursor keys/Ctrl for keyboard joystick? no" fi a800_ans=$a800_defans if test "$a800_ans" = y; then cat >> confdefs.h <<\EOF #define USE_CURSORBLOCK 1 EOF fi ac_cv_a800_USE_CURSORBLOCK=$a800_ans fi # Check whether --enable-JOYMOUSE or --disable-JOYMOUSE was given. if test "${enable_JOYMOUSE+set}" = set; then enableval="$enable_JOYMOUSE" if test "$enableval" = "yes" ; then echo "$ac_t""Enabling JOYMOUSE" 1>&6 a800_ans=y ac_cv_a800_JOYMOUSE=y cat >> confdefs.h <<\EOF #define JOYMOUSE 1 EOF else echo "$ac_t""Disabling JOYMOUSE" 1>&6 fi else if test -n "$ac_cv_a800_JOYMOUSE"; then a800_defans=$ac_cv_a800_JOYMOUSE else a800_defans=n fi if test "$a800_defans" = "y"; then echo "Support for Toshiba Joystick Mouse (Linux SVGALIB Only)? yes" else echo "Support for Toshiba Joystick Mouse (Linux SVGALIB Only)? no" fi a800_ans=$a800_defans if test "$a800_ans" = y; then cat >> confdefs.h <<\EOF #define JOYMOUSE 1 EOF fi ac_cv_a800_JOYMOUSE=$a800_ans fi fi if test "$a800_host" = linux; then # Check whether --enable-LINUX_JOYSTICK or --disable-LINUX_JOYSTICK was given. if test "${enable_LINUX_JOYSTICK+set}" = set; then enableval="$enable_LINUX_JOYSTICK" if test "$enableval" = "yes" ; then echo "$ac_t""Enabling LINUX_JOYSTICK" 1>&6 a800_ans=y ac_cv_a800_LINUX_JOYSTICK=y cat >> confdefs.h <<\EOF #define LINUX_JOYSTICK 1 EOF else echo "$ac_t""Disabling LINUX_JOYSTICK" 1>&6 fi else if test -n "$ac_cv_a800_LINUX_JOYSTICK"; then a800_defans=$ac_cv_a800_LINUX_JOYSTICK else a800_defans=n fi if test "$a800_defans" = "y"; then echo "Enable LINUX Joystick? yes" else echo "Enable LINUX Joystick? no" fi a800_ans=$a800_defans if test "$a800_ans" = y; then cat >> confdefs.h <<\EOF #define LINUX_JOYSTICK 1 EOF fi ac_cv_a800_LINUX_JOYSTICK=$a800_ans fi fi # Check whether --enable-SOUND or --disable-SOUND was given. if test "${enable_SOUND+set}" = set; then enableval="$enable_SOUND" if test "$enableval" = "yes" ; then echo "$ac_t""Enabling SOUND" 1>&6 a800_ans=y ac_cv_a800_SOUND=y cat >> confdefs.h <<\EOF #define SOUND 1 EOF else echo "$ac_t""Disabling SOUND" 1>&6 fi else if test -n "$ac_cv_a800_SOUND"; then a800_defans=$ac_cv_a800_SOUND else a800_defans=y fi if test "$a800_defans" = "y"; then echo "Enable Sound Support? yes" else echo "Enable Sound Support? no" fi a800_ans=$a800_defans if test "$a800_ans" = y; then cat >> confdefs.h <<\EOF #define SOUND 1 EOF fi ac_cv_a800_SOUND=$a800_ans fi if test "$a800_ans" = y; then case "$a800_host" in dos) OBJ_SND="dos/sound_dos.o dos/dos_sb.o" ;; win) OBJ_SND="win32/sound.o" ;; falcon) OBJ_SND="sound_falcon.o falcon/sound_dma.o" ;; *) OBJ_SND="sound.o" esac if test "$a800_target" = sdl; then OBJ_SND="" fi OBJ="$OBJ $OBJ_SND" # Check whether --enable-NO_VOL_ONLY or --disable-NO_VOL_ONLY was given. if test "${enable_NO_VOL_ONLY+set}" = set; then enableval="$enable_NO_VOL_ONLY" if test "$enableval" = "yes" ; then echo "$ac_t""Enabling NO_VOL_ONLY" 1>&6 a800_ans=y ac_cv_a800_NO_VOL_ONLY=y cat >> confdefs.h <<\EOF #define NO_VOL_ONLY 1 EOF else echo "$ac_t""Disabling NO_VOL_ONLY" 1>&6 fi else if test -n "$ac_cv_a800_NO_VOL_ONLY"; then a800_defans=$ac_cv_a800_NO_VOL_ONLY else a800_defans=y fi if test "$a800_defans" = "y"; then echo "Enable volume only sound (digitized sound effects)? yes" else echo "Enable volume only sound (digitized sound effects)? no" fi a800_ans=$a800_defans if test "$a800_ans" = n; then cat >> confdefs.h <<\EOF #define NO_VOL_ONLY 1 EOF fi ac_cv_a800_NO_VOL_ONLY=$a800_ans fi if test "$a800_ans" = y; then # Check whether --enable-NO_CONSOL_SOUND or --disable-NO_CONSOL_SOUND was given. if test "${enable_NO_CONSOL_SOUND+set}" = set; then enableval="$enable_NO_CONSOL_SOUND" if test "$enableval" = "yes" ; then echo "$ac_t""Enabling NO_CONSOL_SOUND" 1>&6 a800_ans=y ac_cv_a800_NO_CONSOL_SOUND=y cat >> confdefs.h <<\EOF #define NO_CONSOL_SOUND 1 EOF else echo "$ac_t""Disabling NO_CONSOL_SOUND" 1>&6 fi else if test -n "$ac_cv_a800_NO_CONSOL_SOUND"; then a800_defans=$ac_cv_a800_NO_CONSOL_SOUND else a800_defans=y fi if test "$a800_defans" = "y"; then echo "Enable console sound (keyboard clicks)? yes" else echo "Enable console sound (keyboard clicks)? no" fi a800_ans=$a800_defans if test "$a800_ans" = n; then cat >> confdefs.h <<\EOF #define NO_CONSOL_SOUND 1 EOF fi ac_cv_a800_NO_CONSOL_SOUND=$a800_ans fi # Check whether --enable-SERIO_SOUND or --disable-SERIO_SOUND was given. if test "${enable_SERIO_SOUND+set}" = set; then enableval="$enable_SERIO_SOUND" if test "$enableval" = "yes" ; then echo "$ac_t""Enabling SERIO_SOUND" 1>&6 a800_ans=y ac_cv_a800_SERIO_SOUND=y cat >> confdefs.h <<\EOF #define SERIO_SOUND 1 EOF else echo "$ac_t""Disabling SERIO_SOUND" 1>&6 fi else if test -n "$ac_cv_a800_SERIO_SOUND"; then a800_defans=$ac_cv_a800_SERIO_SOUND else a800_defans=n fi if test "$a800_defans" = "y"; then echo "Enable serial in/out sound? yes" else echo "Enable serial in/out sound? no" fi a800_ans=$a800_defans if test "$a800_ans" = y; then cat >> confdefs.h <<\EOF #define SERIO_SOUND 1 EOF fi ac_cv_a800_SERIO_SOUND=$a800_ans fi fi # Check whether --enable-NOSNDINTER or --disable-NOSNDINTER was given. if test "${enable_NOSNDINTER+set}" = set; then enableval="$enable_NOSNDINTER" if test "$enableval" = "yes" ; then echo "$ac_t""Enabling NOSNDINTER" 1>&6 a800_ans=y ac_cv_a800_NOSNDINTER=y cat >> confdefs.h <<\EOF #define NOSNDINTER 1 EOF else echo "$ac_t""Disabling NOSNDINTER" 1>&6 fi else if test -n "$ac_cv_a800_NOSNDINTER"; then a800_defans=$ac_cv_a800_NOSNDINTER else a800_defans=y fi if test "$a800_defans" = "y"; then echo "Enable Sound Interpolation? yes" else echo "Enable Sound Interpolation? no" fi a800_ans=$a800_defans if test "$a800_ans" = n; then cat >> confdefs.h <<\EOF #define NOSNDINTER 1 EOF fi ac_cv_a800_NOSNDINTER=$a800_ans fi # Check whether --enable-CLIP or --disable-CLIP was given. if test "${enable_CLIP+set}" = set; then enableval="$enable_CLIP" if test "$enableval" = "yes" ; then echo "$ac_t""Enabling CLIP" 1>&6 a800_ans=y ac_cv_a800_CLIP=y cat >> confdefs.h <<\EOF #define CLIP 1 EOF else echo "$ac_t""Disabling CLIP" 1>&6 fi else if test -n "$ac_cv_a800_CLIP"; then a800_defans=$ac_cv_a800_CLIP else a800_defans=n fi if test "$a800_defans" = "y"; then echo "Enable Sound Clipping? yes" else echo "Enable Sound Clipping? no" fi a800_ans=$a800_defans if test "$a800_ans" = y; then cat >> confdefs.h <<\EOF #define CLIP 1 EOF fi ac_cv_a800_CLIP=$a800_ans fi if test "$a800_target" != falcon; then # Check whether --enable-STEREO or --disable-STEREO was given. if test "${enable_STEREO+set}" = set; then enableval="$enable_STEREO" if test "$enableval" = "yes" ; then echo "$ac_t""Enabling STEREO" 1>&6 a800_ans=y ac_cv_a800_STEREO=y cat >> confdefs.h <<\EOF #define STEREO 1 EOF else echo "$ac_t""Disabling STEREO" 1>&6 fi else if test -n "$ac_cv_a800_STEREO"; then a800_defans=$ac_cv_a800_STEREO else a800_defans=n fi if test "$a800_defans" = "y"; then echo "Enable Stereo Sound? yes" else echo "Enable Stereo Sound? no" fi a800_ans=$a800_defans if test "$a800_ans" = y; then cat >> confdefs.h <<\EOF #define STEREO 1 EOF fi ac_cv_a800_STEREO=$a800_ans fi fi fi case "$a800_target" in x11-*) ;; *) # Check whether --enable-BUFFERED_LOG or --disable-BUFFERED_LOG was given. if test "${enable_BUFFERED_LOG+set}" = set; then enableval="$enable_BUFFERED_LOG" if test "$enableval" = "yes" ; then echo "$ac_t""Enabling BUFFERED_LOG" 1>&6 a800_ans=y ac_cv_a800_BUFFERED_LOG=y cat >> confdefs.h <<\EOF #define BUFFERED_LOG 1 EOF else echo "$ac_t""Disabling BUFFERED_LOG" 1>&6 fi else if test -n "$ac_cv_a800_BUFFERED_LOG"; then a800_defans=$ac_cv_a800_BUFFERED_LOG else a800_defans=y fi if test "$a800_defans" = "y"; then echo "Buffer debug output (until the graphics mode switches back to text mode)? yes" else echo "Buffer debug output (until the graphics mode switches back to text mode)? no" fi a800_ans=$a800_defans if test "$a800_ans" = y; then cat >> confdefs.h <<\EOF #define BUFFERED_LOG 1 EOF fi ac_cv_a800_BUFFERED_LOG=$a800_ans fi # Check whether --enable-SET_LED or --disable-SET_LED was given. if test "${enable_SET_LED+set}" = set; then enableval="$enable_SET_LED" if test "$enableval" = "yes" ; then echo "$ac_t""Enabling SET_LED" 1>&6 a800_ans=y ac_cv_a800_SET_LED=y cat >> confdefs.h <<\EOF #define SET_LED 1 EOF else echo "$ac_t""Disabling SET_LED" 1>&6 fi else if test -n "$ac_cv_a800_SET_LED"; then a800_defans=$ac_cv_a800_SET_LED else a800_defans=n fi if test "$a800_defans" = "y"; then echo "Emulate disk LED diode? yes" else echo "Emulate disk LED diode? no" fi a800_ans=$a800_defans if test "$a800_ans" = y; then cat >> confdefs.h <<\EOF #define SET_LED 1 EOF fi ac_cv_a800_SET_LED=$a800_ans fi if test "$a800_ans" = y; then # Check whether --enable-NO_LED_ON_SCREEN or --disable-NO_LED_ON_SCREEN was given. if test "${enable_NO_LED_ON_SCREEN+set}" = set; then enableval="$enable_NO_LED_ON_SCREEN" if test "$enableval" = "yes" ; then echo "$ac_t""Enabling NO_LED_ON_SCREEN" 1>&6 a800_ans=y ac_cv_a800_NO_LED_ON_SCREEN=y cat >> confdefs.h <<\EOF #define NO_LED_ON_SCREEN 1 EOF else echo "$ac_t""Disabling NO_LED_ON_SCREEN" 1>&6 fi else if test -n "$ac_cv_a800_NO_LED_ON_SCREEN"; then a800_defans=$ac_cv_a800_NO_LED_ON_SCREEN else a800_defans=y fi if test "$a800_defans" = "y"; then echo "Display LED on screen? yes" else echo "Display LED on screen? no" fi a800_ans=$a800_defans if test "$a800_ans" = n; then cat >> confdefs.h <<\EOF #define NO_LED_ON_SCREEN 1 EOF fi ac_cv_a800_NO_LED_ON_SCREEN=$a800_ans fi fi ;; esac echo $ac_n "checking unaligned long accesses""... $ac_c" 1>&6 echo "configure:3961: checking unaligned long accesses" >&5 if eval "test \"`echo '$''{'ac_cv_unaligned_long_ok'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then ac_cv_unaligned_long_ok=no else cat > conftest.$ac_ext < #include #include jmp_buf jmpbuf; void bus_err() { longjmp(jmpbuf, 1); } int main(void) { #ifndef SIGBUS return 0; #else long l[2]; if (setjmp(jmpbuf) == 0) { signal(SIGBUS, bus_err); *((long *) ((char *) l + 1)) = 1; signal(SIGBUS, SIG_DFL); return 0; } else { signal(SIGBUS, SIG_DFL); return 1; } #endif } EOF if { (eval echo configure:4000: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_unaligned_long_ok=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_unaligned_long_ok=no fi rm -fr conftest* fi fi echo "$ac_t""$ac_cv_unaligned_long_ok" 1>&6 if test "$ac_cv_unaligned_long_ok" = yes; then cat >> confdefs.h <<\EOF #define UNALIGNED_LONG_OK 1 EOF fi echo $ac_n "checking size of long""... $ac_c" 1>&6 echo "configure:4023: checking size of long" >&5 if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then ac_cv_sizeof_long=4 else cat > conftest.$ac_ext < #include main() { FILE *f=fopen("conftestval", "w"); if (!f) exit(1); fprintf(f, "%d\n", sizeof(long)); exit(0); } EOF if { (eval echo configure:4043: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_sizeof_long=`cat conftestval` else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_sizeof_long=0 fi rm -fr conftest* fi fi echo "$ac_t""$ac_cv_sizeof_long" 1>&6 cat >> confdefs.h <&6 echo "configure:4064: checking whether byte ordering is bigendian" >&5 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_bigendian=unknown # See if sys/param.h defines the BYTE_ORDER macro. cat > conftest.$ac_ext < #include int main() { #if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN bogus endian macros #endif ; return 0; } EOF if { (eval echo configure:4082: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* # It does; now see whether it defined to BIG_ENDIAN or not. cat > conftest.$ac_ext < #include int main() { #if BYTE_ORDER != BIG_ENDIAN not big endian #endif ; return 0; } EOF if { (eval echo configure:4097: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_bigendian=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_c_bigendian=no fi rm -f conftest* else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* if test $ac_cv_c_bigendian = unknown; then if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_bigendian=no else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_c_bigendian=yes fi rm -fr conftest* fi fi fi echo "$ac_t""$ac_cv_c_bigendian" 1>&6 if test $ac_cv_c_bigendian = yes; then cat >> confdefs.h <<\EOF #define WORDS_BIGENDIAN 1 EOF fi trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs. It is not useful on other systems. # If it contains results you don't want to keep, you may remove or edit it. # # By default, configure uses ./config.cache as the cache file, # creating it if it does not exist already. You can give configure # the --cache-file=FILE option to use a different cache file; that is # what configure does when it calls configure scripts in # subdirectories, so they share the cache. # Giving --cache-file=/dev/null disables caching, for debugging configure. # config.status only pays attention to the cache file if you give it the # --recheck option to rerun configure. # EOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). sed -n \ -e "s/'/'\\\\''/g" \ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" ;; *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' ;; esac >> confcache if cmp -s $cache_file confcache; then : else if test -w $cache_file; then echo "updating cache $cache_file" cat confcache > $cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' # Any assignment to VPATH causes Sun make to only execute # the first set of double-colon rules, so remove it if not needed. # If there is a colon in the path, we need to keep it. if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' fi trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 DEFS=-DHAVE_CONFIG_H # Without the "./", some shells look in PATH for config.status. : ${CONFIG_STATUS=./config.status} echo creating $CONFIG_STATUS rm -f $CONFIG_STATUS cat > $CONFIG_STATUS </dev/null | sed 1q`: # # $0 $ac_configure_args # # Compiler output produced by configure, useful for debugging # configure, is in ./config.log if it exists. ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" for ac_option do case "\$ac_option" in -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; *) echo "\$ac_cs_usage"; exit 1 ;; esac done ac_given_srcdir=$srcdir trap 'rm -fr `echo "Makefile config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 EOF cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF $ac_vpsub $extrasub s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g s%@exec_prefix@%$exec_prefix%g s%@prefix@%$prefix%g s%@program_transform_name@%$program_transform_name%g s%@bindir@%$bindir%g s%@sbindir@%$sbindir%g s%@libexecdir@%$libexecdir%g s%@datadir@%$datadir%g s%@sysconfdir@%$sysconfdir%g s%@sharedstatedir@%$sharedstatedir%g s%@localstatedir@%$localstatedir%g s%@libdir@%$libdir%g s%@includedir@%$includedir%g s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g s%@CC@%$CC%g s%@host@%$host%g s%@host_alias@%$host_alias%g s%@host_cpu@%$host_cpu%g s%@host_vendor@%$host_vendor%g s%@host_os@%$host_os%g s%@EXEEXT@%$EXEEXT%g s%@SET_MAKE@%$SET_MAKE%g s%@CPP@%$CPP%g s%@OBJ@%$OBJ%g CEOF EOF cat >> $CONFIG_STATUS <<\EOF # Split the substitutions into bite-sized pieces for seds with # small command number limits, like on Digital OSF/1 and HP-UX. ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. ac_file=1 # Number of current file. ac_beg=1 # First line for current file. ac_end=$ac_max_sed_cmds # Line after last line for current file. ac_more_lines=: ac_sed_cmds="" while $ac_more_lines; do if test $ac_beg -gt 1; then sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file else sed "${ac_end}q" conftest.subs > conftest.s$ac_file fi if test ! -s conftest.s$ac_file; then ac_more_lines=false rm -f conftest.s$ac_file else if test -z "$ac_sed_cmds"; then ac_sed_cmds="sed -f conftest.s$ac_file" else ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" fi ac_file=`expr $ac_file + 1` ac_beg=$ac_end ac_end=`expr $ac_end + $ac_max_sed_cmds` fi done if test -z "$ac_sed_cmds"; then ac_sed_cmds=cat fi EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case "$ac_file" in *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then # The file is in a subdirectory. test ! -d "$ac_dir" && mkdir "$ac_dir" ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" # A "../" for each directory in $ac_dir_suffix. ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` else ac_dir_suffix= ac_dots= fi case "$ac_given_srcdir" in .) srcdir=. if test -z "$ac_dots"; then top_srcdir=. else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; *) # Relative path. srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" top_srcdir="$ac_dots$ac_given_srcdir" ;; esac echo creating "$ac_file" rm -f "$ac_file" configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." case "$ac_file" in *Makefile*) ac_comsub="1i\\ # $configure_input" ;; *) ac_comsub= ;; esac ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` sed -e "$ac_comsub s%@configure_input@%$configure_input%g s%@srcdir@%$srcdir%g s%@top_srcdir@%$top_srcdir%g " $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file fi; done rm -f conftest.s* # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. # # ac_d sets the value in "#define NAME VALUE" lines. ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' ac_dC='\3' ac_dD='%g' # ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_uB='\([ ]\)%\1#\2define\3' ac_uC=' ' ac_uD='\4%g' # ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_eB='$%\1#\2define\3' ac_eC=' ' ac_eD='%g' if test "${CONFIG_HEADERS+set}" != set; then EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF fi for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case "$ac_file" in *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac echo creating $ac_file rm -f conftest.frag conftest.in conftest.out ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` cat $ac_file_inputs > conftest.in EOF # Transform confdefs.h into a sed script conftest.vals that substitutes # the proper values into config.h.in to produce config.h. And first: # Protect against being on the right side of a sed subst in config.status. # Protect against being in an unquoted here document in config.status. rm -f conftest.vals cat > conftest.hdr <<\EOF s/[\\&%]/\\&/g s%[\\$`]%\\&%g s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp s%ac_d%ac_u%gp s%ac_u%ac_e%gp EOF sed -n -f conftest.hdr confdefs.h > conftest.vals rm -f conftest.hdr # This sed command replaces #undef with comments. This is necessary, for # example, in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. cat >> conftest.vals <<\EOF s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% EOF # Break up conftest.vals because some shells have a limit on # the size of here documents, and old seds have small limits too. rm -f conftest.tail while : do ac_lines=`grep -c . conftest.vals` # grep -c gives empty output for an empty file on some AIX systems. if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi # Write a limited-size here document to conftest.frag. echo ' cat > conftest.frag <> $CONFIG_STATUS sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS echo 'CEOF sed -f conftest.frag conftest.in > conftest.out rm -f conftest.in mv conftest.out conftest.in ' >> $CONFIG_STATUS sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail rm -f conftest.vals mv conftest.tail conftest.vals done rm -f conftest.vals cat >> $CONFIG_STATUS <<\EOF rm -f conftest.frag conftest.h echo "/* $ac_file. Generated automatically by configure. */" > conftest.h cat conftest.in >> conftest.h rm -f conftest.in if cmp -s $ac_file conftest.h 2>/dev/null; then echo "$ac_file is unchanged" rm -f conftest.h else # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then # The file is in a subdirectory. test ! -d "$ac_dir" && mkdir "$ac_dir" fi rm -f $ac_file mv conftest.h $ac_file fi fi; done EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF exit 0 EOF chmod +x $CONFIG_STATUS rm -fr confdefs* $ac_clean_files test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1