|
You are here : Atari Pages/Support and FAQ | ||
 | ||
|
Philippe's Web Site : Atari 8bit FAQ and Support -
PC<>ATARI serial link interface | ||
|
PC<>Atari Disk Drive serial link communication interface:
1. Introduction
The schematic drawing I propose below is the component view as it could be realized on a ready-printed PCB board (linear copper tracks).
For more details please visit the SIO2PC website here. Only the 1050_2_PC cable must be used, connecting the PC to an Atari floppy disk drive (like the 1050 drive) through the serial port.
Unfortunately, the interface cable can not be a simple passive cable. An active interface module is required. It is based on the MAX232 chip. This component is used to cenvert the RS232 signal from the PC (standard voltage levels are +/- 10 Volts) into Atari-adapted RS232 signals (TTL voltages levels are 0/+5 Volts).
EN CONSTRUCTION
2. Schematic diagram:
Download here my drawing:
To contact me:/Pour me contacter:
[Site Philippe Index] [Page Top]
This page © PV January 2002
Atari is a registered trademark / Atari
est une marque déposée.
MS-DOS and Windows are registered trademarks of
Microsoft Corp / MS-DOS et Windows sont des marques déposées de Microsoft
Corp.
All Software names are registered by their owner / Les noms de logiciel
appartiennent à leur auteur.
If you have any comments or anything to tell me
about the content of this page please contact me mailto:PVBest@free.fr
Pour tous commentaires
ou suggestions sur le contenu de cette page contactez-moi mailto:PVBest@free.fr
