Autostart



Autostart.app run jingles at a specified time.

To set the start time use the upp and down arrows at setup window.
Be sure that you select the block and jingle number.

If the blocks is changed then you need to change
the setup in autostart.

It's able to select jingle blocks and
run jingles even if the autostart is topped.

When it is 20 seconds to lounch of the jingle
the block is loaded.

From 10 seconds and down to start a shrinking bar
displays the remaing time to start of jingle.

After a jingle has run next time is selected
and a new countdown is started.
If there is no more jingles to autostart
then the autostart application terminates.

Note that if running an a 16 MHz FALCON
it will be very heavy for the computer to
run this application but it works.

It is recomended to run a FALCON on 32 MHz
when using this application.