This is a 10" X 14" tablet that lets you slip in a half letter page to trace or freehand a drawing into the computer. Four colors, patterns, fills, custom/grab patterns, save/load, cut/paste, text, brushes, magnify, and tools. I have used this and now prefer it over the Atari/Koala pad software. A convert/gray-scale print utility is on the site.
09June2009:Several Notes:I have traced a problem with these tablets not working past "press MENU" to 1 or both slide potentiometers having too low a value(<470K), probably due to age, so the number(s) returned are too low for the tablet to think you are at the lower right corner. Using a joystick first, then switching to the SST may get around this, but the accuracy on screen will still be diminished. This was apparently the reason the XEGS would not work with the SST, so the same fix will work. Replacing the pots will create a permanent solution. I have tested pots available. Note also that the routine for the cursor was badly done, so there is noticeable jitter at the cursor point, making a small mess. This is worse for the XEGS. This requires a software fix. I WILL KEEP OPENED AND TESTED TABLETS AVAILABLE FOR ORDERS, AS TIME ALLOWS.
(wt.:3 lb) |