MJDBASE (ISSUE 29): Reader Eric Chapman has suggested the
following amendment to this program. As new records are entered, the
index is re-sorted on each entry which means that the program slows
considerably when there are several hundred records. The following
changes will mean that the index is only re-sorted when you exit New
Record mode. Change the following lines:
10300 RECS=RECS+1:CHANGE=1
10600 – Replace the RETURN at the end with GOTO 29200
DESIGNER LABELS (ISSUE 26): The article states Epson Compatible
Printer required but what wasn't clear at the time was that whilst
it would run on an Epson 'compatible' it doesn't actually run on an
Epson! Quite a few lines need to be changed as follows
|
|
![](../download.gif) |
You may also need to change one of the dip switches in the
printer to activate the Graphics character set. Unfortunately,
different models have different settings so you will have to refer
to your manual.
______
COMING SOON ...
WARGAMES ... A massive review, all you need to know
EXPANDING YOUR ATARI ... all the juicy details about those I/O and
expansion ports and what to do with them
top